|
|||||||||||||||||
Boilers
The BIASI B10 Boiler System
Our B10 Boiler, coupled with an indirect storage tank, will supply all the hot water you need; which means no more cold showers.
In the summer, the B10 boiler only needs to fire once or twice a day, because ample amounts of domestic hot water are readily available in a 40 gallon indirect storage tank. Compare that to a single pass boiler, which may use a tankless coil holding less than 1/2 gallon of domestic hot water. With the BIASI B10 boiler and an indirect storage tank, you'll always be in hot water, and at a lower cost than a conventional boiler system or an electric water heater.
BIASI B10- SERIES ADVANTAGES
- Lifetime Warranty
- Can reduce heat and hot water costs by half
- UL and CUL Listed
- BIASI B10 boilerblock is ASME rated for 58 psi
- GG20 flexible cast iron construction for superior durability
- Quiet Operation
- Multi-fuel capability (adapts easily to oil or gas burners)
- Direct vent listed oil or gas (no chimney needed)
- Uses the smallest pissible volume of water (as little as 3 gallons)
- Low maintenance; easy to access, easy to clean
- Extra heavy insulation for low jacket and standby losses
- Compatible with all electronic control systems
The B-10 boiler systems have been heating residential and commercial buildings throughout the world for years. It has proven its fuel efficiency and durability in countries where fuel can cost up to four times as much as in the U.S. The same fuel saving technology is now available here in North America. With the three pass boiler design and low water content, heat is quickly supplied for your heating zones and hot water needs. Combined with an outdoor reset control, you can achieve a fuel savings of up to 40% over conventional single pass boilers. You will also have peace of mind since the B-10 boiler package complies with ASME and UL standards and is IBR rated. The B-10 boiler system is the cost-competitive heat and hot water system of choice.
A 3-pass boiler design is the most efficient way to get the maximum amount of heat from the fuel, since it contains three times as much interior surface area (compared to a single-pass boiler) to extract heat from
The Vitogas 050, ECD-S Series boiler
The Vitogas 050, ECD-S Series boiler combines compact and versatile design, reliable performance and proven Viessmann quality in an economical package
The benefits at a glance:
- Viessmann heating technology at an attractive price.
- Get the most out of your fuel dollar! A.F.U.E. of up to 83.7%.
- Extremely durable gray cast iron heat exchanger for maximum operational reliability and service life.
- Durable gray cast iron heat exchanger
- Efficient combustion and quiet operation with large diameter, stainless steel burners.
- Integrated draft hood and vent damper for vertical chimney venting.
- Integrated pump aquastat protects against corrosive flue gas condensation, extending service life of boiler.
- Compact, lightweight design and minimal clearances allow installation in difficult-to-access boiler rooms, even alcoves or closets.
- Thick insulation reduces standby heat losses.
- Spacious, wet-base water walls prevent deposits, reduce stress and increase boiler life.
- Boiler can be mounted on top of a horizontal Vitocell hot water storage tank for increased versatility and space-efficiency.
- More overall comfort, savings and reliability with added Viessmann Vitocell indirect-fired DHW tank.
Votola 200
Hot water heating boiler with cast iron/steel biferral heat exchanger surface for modulating boiler water temperatures without low limit.
Rated input: 90 to 300 MBH - 26 to 88 kW
Highest quality and top performance - this is what the Vitola 200 offers. With its biferral heat exchanger surface, the Vitola 200 sets a new standard, which has written heating history. The heat exchanger surface has a decisive advantage compared to conventional heating surfaces.
The benefits at a glance:
- Specifically designed for modulating boiler water temperatures without low limit. The biferral heat exchanger surface made of cast iron and steel provides for high operational reliability and a long service life.
- Biferral heat exchanger surface
- Low-emission combustion burner (oil- or gas-fired) and optimized combustion chamber geometry.
- Extremely economical and environmentally friendly through modulating boiler water temperature; the boiler switches off completely when no heat is required.
- Reliable heat transfer due to wide water jackets and large water content.
- Highly effective boiler insulation for negligible standby losses.
- Easy installation and start-up: all Viessmann burners are factory tested and adjusted to the rated output.
Vitodens 100-W
Gas-fired wall-mounted condensing boiler with modulating stainless steel cylinder burner and Inox-Radial heat exchanger surface.
Rated input: 37 to 118 MBH
The perfect mix of performance, quality and value, the Vitodens 100-W gas-fired wall-mount condensing boiler is ideal for any home and any budget. With added product features, the new generation of this popular boiler now offers even greater versatility and choice.
The benefits at a glance:
- Fits Any Home and Budget with high performance at an attractive price.
- Outstanding Efficiency of 95.2% A.F.U.E. on all models.
- Lasting Performance with industry-leading Viessmann made SA240 316 Ti stainless steel Inox-Radial heat exchanger constructed to CSA B51 and ASME Section IV.
- Viessmann made stainless steel Inox-Radial heat exchanger
- Low-Emission Combustion with Viessmann made stainless steel MatriX cylinder burner for natural gas or propane. Factory calibrated.
- Versatile On-Board Boiler Control interfaces with most external controls. Now with integrated 0-10V and OpenTherm® communication ability. Outdoor temperature sensor standard.
- Greater Venting Flexibility with increased vent length (up to 200’) and multiple venting options
- Horizontal or vertical sealed combustion coaxial venting (factory supplied).
- Horizontal, vertical or hybrid sealed combustion double-pipe venting (field supplied).
- Horizontal or vertical single-wall venting (field supplied).
- Suitable for Altitude Levels of up to 10,000 ft. / 3000 m.
- Easy Installation, Service and Maintenance with all pipe connections located at the bottom and serviceable components easily accessible from the front.
- Extremely Quiet Operation; quieter than most refrigerators.
- Compact, Lightweight Design and zero clearance to combustibles.
- Built-in Automatic Frost Protection prevents freeze-up during long shut-off periods.
- Limited Lifetime Warranty in residential applications.
Cylinder Burner
Stainless Steel Radial Heat Exchanger
Copyright Crystal Heating and Air Conditioning - 2011
