furnaces

Crystal carries both Keeprite and Goodman products. For some of our Keeprite products, scroll further down the page.

Goodman Manufacturing Company, L.P. ("Goodman") produces a complete line of
residential and commercial air conditioning and heating equipment and is sold through a worldwide network of independent distributors and installers who are dedicated to uphold the company's high standards of quality. The Goodman philosophy: Be the highest quality, lowest cost producer of heating and air conditioning equipment in the world. Is it successful? Goodman's share of the market has

grown faster than any other major manufacturer. Our Quality and Value speak for themselves.

95% AFUE GMS95
MULTI-SPEED GAS FURNACE

What should you expect from our Goodman 95% AFUE High-Efficiency Multi-Speed Gas Furnace? How about superior performance, efficiency and affordability?

Your High-Efficiency Multi-Speed Gas Furnace uses a multi-speed blower motor and sound-isolated blower assembly to reduce the noise levels common in other furnaces. Add a fully insulated, heavy-gauge steel cabinet, and the result is... extra-quiet comfort.

The heart of any furnace is the heat exchanger. Our patented, aluminized-steel tubular heat exchanger and stainless-steel recuperative coil have been tested to the highest industry standards. We guarantee their performance and back it up with a LIFETIME LIMITED WARRANTY.

93% AFUE GMV9 / GCV9 VARIABLE-SPEED GAS FURNACE
Precise Room-to-Room Temperature Control Goodman’s 93% AFUE High Efficiency Gas Furnace with two-stage heating and a variable-speed circulating blower provides a total comfort home-heating alternative – efficiently and economically. This furnace’s variable-speed circulating blower reduces operating costs and advances home comfort by reducing temperature swings and stratification from floor to ceiling.
Unlike standard furnaces that run “all on” or “all off”, a Goodman variable-speed furnace runs 90% of the time in the low-heat capacity on most days, but when the weather is very cold, ramps up to high-heat capacity so that your family stays warm and snug. The variable-speed blower improves air circulation and helps keep the air temperatures more consistent throughout your home. Quiet Operation Your Goodman High-Efficiency Furnace uses a multi-speed induced draft blower to reduce the noise levels common in other furnaces. Since this unit runs in low-heat stage 90% of the time, the impact of the normal high-fire sound is eliminated 90% of the time. Add to that a fully insulated, heavy-gauge steel cabinet and the result is extra-quiet comfort. Year Round Energy Efficiency Energy Efficiency is key to controlling the cost of heating in your home. This Goodman furnace’s 93% AFUE rating means 93 cents of every dollar of heating energy expense warms your home. Some older central heating systems reate at 60% AFUE, meaning only 60 cents of the gas burned contributes to your home’s heating. The remaining 40 cents is lost energy—wasteful and expensive. Goodman Guaranties Warranties The heart of any furnace is the heat exchanger, and we guarantee their performance and back it with a LIFETIME LIMITED WARRANTY. We guarantee that if the heat exchanger fails during the first 10 years of ownership, we will replace the entire unit. This Goodman furnace also has a full 5-Year Limited Warranty on all other functional parts.

80% AFUE GMS8 / GDS8 / GHS8 MULTI-SPEED GAS FURNACE
Provide Your Family with Heating Comfort They Can Depend On As a homeowner, you want a cost-effective way to maintain a comfortable environment for your family. Introducing the Goodman 80% AFUE Multi-Speed Gas Furnace, which provides effective home heating at an affordable price. What should you expect from your Goodman 80% AFUE Multi-Speed Gas Furnace? How about superior performance and affordability? That’s just what you will get with Goodman. Year-Round Energy Efficiency Energy efficiency is key to controlling the cost of heating your home. This furnace’s 80% AFUE rating means 80 cents of every $1.00 of heating energy expense warms your
home. Some older central heating systems rate at 60% AFUE, meaning only 60cents of the gas burned contributes to your home’s heating. The remaining 40 cents is lost energy—wasteful and expensive. Switching to a Goodman 80% furnace cuts that loss in half.
Reliability and Long Life The heart of any furnace is the heat exchanger. Our patented aluminized-steel tubular heat exchanger has been tested to the highest industry standards. The unit has an energy-saving Hot Surface Ignition system and integrated controls with diagnostics, plus a combination redundant gas valve and regulator for further safety and reliability. Quality Manufacturing Backed by Warranties and Service Goodman-Guaranteed Warranties We guarantee your Goodman 80% AFUE Multi-Speed Furnace with a strong warranty, a testimony to our faith in the quality of our product. We provide a 20-Year Limited Warranty on the heat exchanger and a 5-YearLimited Warranty on all functional parts. For even greater protection and worry-free ownership, ask your Goodman dealer about GoodCare, and affordable extended parts and labor warranty for your entire system. Guaranteed Quality From Goodman, you can depend on well-designed, top-quality, thoroughly tested products, backed by the best standard and extended warranties in the industry. All Goodman production facilities are focused on strict, quality-driven processes. Every single furnace and air conditioner is run-tested before shipment. This quality focus ensures a trouble-free installation and long product life.

Most furnaces over 15 years old are inefficient and waste energy. If the heat exchanger is cracked or rusty, dangerous carbon dioxide gas may be leaking into your home. Consider upgrading to a new Keeprite high efficiency furnace. You can expect lower heating bills, quiet operation, hot surface ignition to eliminate constant burning of a pilot, and warranties that ensure years of worry free comfort from a company that has set the standard for over 50 years. Every home is different with unique comfort needs. That's why Keeprite furnaces come with a host of features that allow us to tailor a heating system individually for you. They come in a broad range of capacities and dimensions, so there's one that is right for your home. Below are a few of our popular models, but contact us to find out about our large variety.

SoftSound - DLX 80 GAS FURNACES KEEPRITE

The heart of every furnace is the heat exchanger, and our patented RPJ III aluminized steel heat exchanger is designed for efficiency, durability and safety. The weld-free, interlocking clamshell construction means there are no welds to crack. The special integrated ripple-edged design forces more heat to the outside surface areas for higher efficiencies. Know you are protected. KeepRite warranties make a strong statement about the quality of the brand. The SoftSound DLX 80 Gas Furnace comes with an impressive 20 year limited warranty on the heat exchanger and a 5 year limited warranty on all the other parts. RPJ III heat exchanger features patented interlocking clamshell construction, using proven weld-free technology for increased reliability and performance. The integrated ripple-edged design forces more heat to the outside surface areas for higher efficiencies. Because it’s made of aluminized steel, it provides years of reliable operation.

Standard Features of the DLX 80 Furnace

	Double-wall door design uses a galvanized steel panel that works with the thermal-lined and insulated steel cabinet to reduce operating sound.
	Hot surface-to-pilot ignition and in-shot burners provide reliable starts and efficient operation.
	Multispeed PSC circulation blower runs quietly and efficiently.
	State-of-the-art electronic control board monitors operation and provides diagnostics.
	Included draft blower assembly provides quiet operation.
	Compact 40” steel cabinet allows for installation flexibility.

SoftSound - VS 90 Variable Speed
TWO-STAGE GAS FURNACES
KEEPRITE

The Ultimate in Climate Control
The SoftSound VS 90 is remarkably quiet, thanks to its two-stage operation and variable speed circulation blower. It runs quietly in the slower speed, and gently – quietly—increases to the higher speed as more heat is needed. The unit’s solid doors, cabinet insulation and burner enclosure also work to dampen sound. You can even program the variable speed blower to run continuously at the lower speed (in conjunction with the air filter) to improve air quality year round. Prewiring also allows for the easy addition of electronic air filters and humidifiers.

Technology for savings.

At 92% AFUE, the SoftSound VS 90 takes fuel efficiency to the highest level. Compare that to a typical 60% to 65% for old, inefficient units and you can imagine the big energy savings! The key to the SoftSound VS 90 is the stainless steel RPJ III heat exchanger. This remarkable weld-free primary heat exchanger, made of durable stainless steel, is among the most innovative ever. The unique integrated ripple-edged design forces more heat to the outside surface area for higher efficiencies with years of reliable operation.

Committed for the long-term.

The SoftSound VS 90 speeds up servicing with electronic controls that provide diagnostics to pinpoint problems. And it’s backed by the industry’s

best warranties – a lifetime limited warranty on the primary and secondary heat exchangers and a 5 year limited warranty on all other parts.

Standard Features of the VS 90 Furnace

	Two-stage redundant gas valve and two-speed induced draft blower assembly operate at the quieter first stage up to 80% of the time, reducing input ot burner; flow increases with demand for higher heat.
	State-of-the-art electronic controls monitor system operation.
	Variable speed circulation blower motor, prelubricated, dynamically balanced and resilient-mounted, reduces vibration and noise; uses up to 50% less electricity than conventional motor for considerable savings.
	Hot surface-to-pilot ignition for reliable starts.

RPJ III heat exchanger, made of durable weld-free stainless steel, is one of the most innovative primary heat exchangers ever. The unique integrated ripple-edged design forces more heat to the outside surface area for higher efficiencies. The secondary heat exchanger is also corrosion-resistant stainless steel, made for years of reliable operation.

SoftSound - DLX 90 GAS FURNACES KEEPRITE

	Keep out the noise and the cold.... When you upgrade to the DLX 90, you'll understand why this gas furnace deserves the KeepRite SoftSound name. The reason for the quiet is the combination of craftsmanship and quality KeepRite builds into the system. The thermal-lined and insulated cabinet, with solid doors, retains heat and reduces operating sounds. And the installer can even tailor the timed blower, using the adjustable off delay, for maximum comfort.
...Season after season. If you want a furnace that will last for years, this is the one. Components are designed for efficiency, durability, and safety. The heat exchangers are made of tough stainless steel for years of trouble-free operation. The direct vent option uses clean outdoor air for combustion, thereby minimizing chemicals that can corrode a heat exchanger. The hot surface-to-pilot ignition provides a superior controlsystem for consistent starts. Safety is handles by a single-stage gas valve operation, special sensors, and limit controls. A self-diagnostic system also makes a furnace checkup quick and wasy for your technician. Warm up to the energy savings. This furnace even softens the shock of monthly heating bills. The 92% AFUE rating is your assurance that the KeepRite SoftSound DLX 90 doesn't waste fuel - or your money - like that old, inefficient system. High efficiency starts with RPJ III heat exchanger. It's made of stainless steel, engineered for maximum heat transfer and corrosion resistance. The weld-free construction means there are no welds to crack under the strain of heating and cooling. The stainless steel secondary heat exchanger captures heat that's wasted in less efficient gas furnaces. Get the Backing of Solid Warranties. KeepRite warranties make a strong statement about the quality fo the brand. The KeepRite SoftSound DLX 90 Gas Furnace comes with an impressive lifetime limited warranty on the primary and secondary heat exchangers and a 5 year limited warranty on all other parts.

Special Features of the DLX 90 Gas Furnaces

	RPJ III HEAT Exchanger features patented interlocking clamshell construction, using proven non-weld technology for increased reliability and performance. The integrated ripple-edged design forces more heat to the outside furface areas for higher efficiences. Because it's made of stainless steel, it provides years of reliable operation.
	Stainless Steel Secondary Heat Exchanger boosts efficiency and provides superior strength and resitance to corrosion.
	Hot Surface-to-Pilot Ignition provides reliable starts and efficient operation. Quiet induced draft blower assembly and in-shot burners assure reliable starts and efficient operation.
	Multi-speed PSC Circulation Blower runs quietly and efficiently.
	State of the art Electronic Contol board monitors operation and provides diagnostics.

PS90-DV GAS FURNACES KEEPRITE

	Yes you can have it all. Efficiency, reliability, quality. The KeepRite PS90-DV Gas Furnace has all ther latest engineering advances inside a surprising compact unit. Not only does it bring down heating costs, this furnace even brings down the noise level. Just another way to add to your comfort. The quiet comes from the sealed and gasketed burner compartment. Direct venting also has the advantage of quieter operation. For an added measure of comfort, your installer can even set the adjustable times blower to match your personal preferences. Make your fuel go farther. The higher the efficiency, the less the waste, the more you save.
Compared to older, less efficient furnaces, the PS90-DV Gas Furanace is an impressive energy cost-cutter. It's rated a high 90% AFUE (Annual Fuel Utilization Efficiency). Give credit to the heat exchanger, the newest generation of KeepRite's own construciton design, which increases heat output and reliability. The primary heat exchanger, combines with a stainless steel secondary heat exchanger, allows for the maximum heat out of fuel. Other features, such as in-shot burners and thermal-lined heat exchanger compartment, contribute to the lasting quality of this furnace. You're in control. Old furnaces can be tempermental. But KeepRite engineers built the PS90-DV Gas Furnace to be predictable and reliable. Set your themostat and a hot surface-to-pilot-ignition along with a multi-speed PCS blower respond to your command every time. Multiple safety features, such as the single-stage gas valve operation, flame roll-out sensors, and high limit controls, make for worry-free operation. This furnace even has terminals for an air cleaner and humidifier, according to your choice. And you're covered. You can expect years of service from the KeepRite PS90-DV Gas Furnace- as long as 20 to be exact. The primary and secondary heat exchangers carry a 20 year limited warranty and all functional parts feature a 5 year limited warranty. You can go beyond that time with additional warranty coverage.

Special Features of the PS90-DV Gas Furnaces

	HEAT Exchanger of strong aluminized steel features weld-free construction to eliminate problems such as cracking and leaking; unique intergrated ripple-edge design forces more heat to the outside surface area for higher efficiency.
	Induced Draft Blower assembly for quiet and efficient performance.
	Multi-speed PSC Circulation Blower built for durablity and reliability
	Hot Surface-to-Pilot Ignition a proven system for reliable starts.
	Compact 40-inch one piece cabinet with a thermal-lined heat exchanger compartment to better retain heat and reduce operating sounds
	Direct Vent Operation uses clean outdoor air for combustion, reducing potential corrosion in the heat exchanger.

Website design by Genesis Web Productions